A Lasting Impression: Etching and the Found Object
This exciting new two-day workshop brings students through the process of etching imagery and/or text into copper, brass and nickel using a variety of techniques, each with their own particular personality. Plates etched using these methods will then be carefully cut, formed and shaped to integrate with found objects brought by the students, creating a mysterious marriage of found and fabricated materials.

The tools below are things you will be using in the workshop, and to avoid having to wait for a communal tool to become available, you should plan on getting them for the class:

• Assorted COPIES to etch with. IMPORTANT - READ THIS. Be sure your copies are from a copier that uses powdered toner, (laser copies are fine, again, if the toner is powdered) Many KINKO'S copies will not give a satisfactory result, I've found...
they use a liquid toner rather than a powdered one...try a different copy center.

Try to keep them purely graphic, as photographic grey-tones won't translate as accurately with this method [unless they are screened in a dot pattern]. Although I have seen incredible images etched with photographic images, so bring some in to experiment with. In either case, make sure the copies are good and black, with lots of toner on the paper. Bring at least three copies of each image you want to try.

IMPORTANT: If you want to use an image of an object or a person/animal, etc., and you want it to etch AS YOU SEE IT in the copy, you'll need to INVERT the image - that is, the black lines or tones should be flipped so they are the white parts on the copy, and vice-versa. Think of a photographic negative - that's what your copy needs to look like for it to etch as a positive image...make sense?

if you want to etch lettering, you'll need the copy to show the text BACKWARDS. This can be done in one of three ways:

1) manipulate the text on a computer, then flip it so it's backwards and print it out onto good quality paper. Then you can take that to the copy place to have your copies made.

2) Some copy machines have a button that will flip the image.

3) Copy your text first onto copier-safe acetate, then flip the acetate over and copy that onto paper, making the type backwards on the paper...make sense? Keep in mind that whatever you copy will be flipped from the original.) Bold, strong images will tend to give better results (i.e., copies with lots of black).

So, if you have images AND text together, and you want them to read correctly on the metal, you'll need to flip AND invert the image. See images here:

Original text

Copy - Flipped and Inverted

Finished plate

Another suggestion regarding copies for the class is not to gang the images up smack next to each other; leave at least 1 inch of white paper around each side of the image. You'll breathe a bit easier!

IMPORTANT: Make copies as above on at least 2 or 3 sheets of the Press-n-peel transfer film (see supply list below) - follow instructions that come with the paper, but in short, copy onto the MATTE BLUE side of the film. The choice of toner here is not an issue - still no ink-jet, but basically any toner copier will work.

• Ring Clamp: <Here>

• bench pin <Here> (if yours doesn't come with a clamp to hold it to the table, bring a BAR CLAMP <here>) If you have trouble getting a bench pin for whatever reason, bring a 10" long piece of 1/2" x 4" wood and I will hand-cut one for you! If you choose this option, you'll need to have the bar clamp linked to above.

• Jeweler's Saw: Don't skimp on this - choose a German frame. Go <Here> and choose the 6" model. If you've already got a saw, that'll be fine to bring...

• saw blades (get two sizes: 1 dozen of the #1 size and 1 dozen of #2/0 (that's "two-aught") or 3/0 size, any brand

• Hand drill. A cordless, variable-speed hand drill is perfect and will be one of the most useful tools in your home, trust me! Here is one for $30 that fits the bill. Be sure to charge up the battery before getting to the class! I have also gotten an excellent 'cordless compact drill/driver', made by Chicago Tools, at Harbor Freight (though for some reason they don't have it on their website). Go in, if you live near a Harbor Freight, and ask for their "Cordless Compact Drill-Driver". For those who don't want to get the electric drill, Fiskars makes a good and very inexpensive manual drill (like under $15!): <Here> It isn't as versatile, but it will work in a pinch.

• rawhide mallet (about a 4oz. is perfect: <Here>

• Set of drill bits (any standard hardware-store set of 'high-speed steel' drill bits)

• Two extra 1/16" drill bits

• Piece of scrap wood to drill into

• Scraps or sheets of copper, brass or nickel; and if you'd like, objects made of these metals you'd like to etch onto. Remember that if you use foil-thin metal, you will only be able to etch very lightly. Copper or brass sheeting (up to 1 mm thick is perfect) can be purchased most inexpensively through a local metal surplus yard...look in the yellow pages under scrap metal, then call to ask if they allow the public to buy. The metal is sold by the pound, so it's much cheaper than buying it from a jewelry or hobby supply. Most model train / hobby stores will have sheets of brass and copper as well. I would recommend against the rolls of copper foil sold in some craft stores, as it is so thin that there isn't much depth to etch into, but if you have some, bring it, as it can still be used for certain effects.

• Tin snips (Wiss makes the most commonly found one, though if you're planning on snipping a lot of metal, these aviation 'lever snips' cut beautifully with less hand effort (one cuts to the left, and one to the right, and either will cut straight): <Here>

• 3M Wet-Or-Dry Polishing Paper This is simply a MUST HAVE. Comes in a pack of six sheets. Be sure to number them on the back when you first open the package, 1 being roughest to 6 being finest. Here is the best source I've found for the larger (8.5" x 11") sheets.

• Press-n-Peel Blue Transfer Film <Here> This company, Techniks, makes this film. The smallest amount to buy is 20 sheets, but if you have a friend who wants to split it that will work out well - in any case, the stuff is WONDERFUL, and you won't be sorry for making the purchase.

• An old iron Be sure to bring one that won't be used on clothes anymore! There are lots of small travel irons that work great - look at this tiny one here - haven't seen one in person, but it's too cute not to get and it's the perfect size. If you're coming with a friend, two or even three or more people can share an iron.

• Heat-proof Board <Here> and scroll down to "Cordiorite Soldering Board with Rubber Feet, 6" x 6" x ½" which is item# 54.218. If you don't buy that, bring any flat heatproof surface that will withstand the heat of the iron - a firebrick would do as well, but isn't very luggage friendly!

• A bottle of ferric chloride solution. This has become harder to procure lately, as Radio Shack stopped carrying the stuff, and now apparently has it back in. Check first with a Radio Shack. Another option: Look up any electronics supply places in your area, and ask for 'PCB (circuit board) etchant.' Or, to order online, try MG Chemicals. You may want to have it shipped to the venue in advance, if you're flying, as they won't let it on airplanes now. Sheesh! If you're in the class with a friend, you can share a bottle.

• Small can of acetone (available at any hardware store). Don't bring nail-polish remover, as it is weaker than pure acetone. If you're in the class with a friend, you can share a bottle, or pour some into a small travel-shampoo bottle to bring - no need to have the whole can.

• Bottle of ammonia. This is used to neutralize the etching solution, so we'll use as much as you bring. If you're in the class with a friend, you can share a bottle.

• A few small flat plastic tupperware or microwave-dinner trays, about 1-2 inches deep

• Cotton pads

• Scotch-Brite pad

• Extra-fine wet/dry sandpaper (600 is the roughest to bring - see if your hardware store has really fine stuff, like 1000 or 1200 grit)

•Sharpie markers (the fresher the better... make sure to get at least one wide or chisel-point)

• Roll of masking tape (as wide a roll as you can get) or clear packing tape

• Old rag for wiping up any spills, etc.


• spring-loaded, or 'automatic' center punch. Can be found at most hardware stores, but go here to see what they look like. Here is a lightweight version that is quite nice).

• Found objects: Bring an assortment of objects and materials from home that you might be able to marry with your etched plates - old boxes, hand mirrors, and misc. bits - whatever kinds of objects float your boat.

 

Please email me with any questions you might have that this page didn't address.

See you there! Keith